Compare marble effects, ocean-inspired colour, metallic copper and terrazzo-style finishes. Open any sample at full size to explore its details.
Design reference E-01 to E-09 · Colour and finish are confirmed through sample approval.
01 / Grey & gold — a richer marble direction02 / White marble — light and expressive03 / Glossy grey — a quieter foundation
These supplied visuals are illustrative design samples, not verified photographs of completed Vhanja projects. Decorative patterns vary with application; appearance, gloss, texture and colour are agreed through a physical sample.
Indicative planning rates · 2026
A clearer starting point for your floor.
The ranges below are planning estimates for materials and application labour. A floor inspection and written scope are required for a confirmed quotation.
Indicative decorative epoxy flooring rates per square foot
Design
₹ / sq. ft.
E-01 White & Gold Marble
₹180–280
E-02 Grey Marble
₹150–230
E-03 Black & Gold Marble
₹190–300
E-04 Beige Marble
₹150–230
E-05 Ocean Blue
₹180–280
E-06 Emerald Green
₹180–280
E-07 Metallic Copper
₹170–260
E-08 Terrazzo Epoxy
₹140–220
E-09 Glossy Grey
₹100–160
Plan your flooring cost.
Estimated project value₹1,50,000 – ₹2,30,000
At ₹150–₹230 per sq. ft., before applicable GST and major substrate repairs.
Indicative planning rates, not verified market quotations or a fixed-price offer. Assumes a sound substrate and typical residential decorative work. GST, extensive repairs, moisture treatment, access constraints and unusual design work may be extra. For existing tiles, grinding, joint filling and a compatible primer may need a separate allowance; an indicative ₹25–60 per sq. ft. allowance can be discussed, subject to inspection and the written quotation.
Good preparation. Considered maintenance.
Beauty starts beneath the surface.
01 / Assess
Start with the base.
Check floor condition, moisture, cracks and adhesion before specifying the primer and decorative system. Existing tiles need a compatibility and preparation review.
02 / Specify
Match the space.
Traffic, sunlight, wet use and required slip resistance influence the flooring system. Kitchens, bathrooms and workshops need their own suitability assessment.
03 / Maintain
Care for the finish.
Follow the selected manufacturer's cleaning regime. Remove grit, protect furniture contact points and review surface wear with the installer before any renewal work.
Sometimes, after confirming that tiles are firmly bonded and the proposed flooring system is compatible. Preparation, joint treatment, primer and moisture requirements must be reviewed before a quotation is agreed.
Does epoxy need polishing every year?
Maintenance should follow the installed system's instructions. Routine cleaning and condition-based finish renewal are different from stone polishing. Agree the care plan and any topcoat maintenance with the installer.
Will it resist scratches or a falling steel object?
No decorative floor is damage-proof. Sharp or heavy impacts can mark or damage the coating or substrate. If impact exposure is expected, request a system assessed for that duty rather than selecting only by appearance.
How long will the finish last?
Service life depends on preparation, the complete coating system, traffic, moisture, sunlight and maintenance. Ask for the proposed product specifications and written warranty terms; this page does not promise a fixed lifespan.
Can I use a glossy finish in a bathroom?
Wet areas require an appropriate slip-resistant system and coordinated waterproofing and drainage. A glossy living-room concept should not be treated as a wet-area specification.
Vhanja Constructions Limited · Odisha
Give your space a distinctive foundation.
Share the area, location, current floor condition and your preferred design code. Start with a sample discussion and floor review.
